Song Editor: The Track Page - Kurzweil K2600 Musician's Manual

The View page determines which events you see when youÕre on the EVENT page. If you set a
parameter on the View page to Off, you wonÕt see any of the corresponding events on the
EVENT page, and the events wonÕt be executed as they normally are when you scroll through
the Event list. For example, if you turn Sustain off, then as you scroll through the list none of the
notes normally affected by sustain will be sustained. However, if you exit the editor and play the
song, all events will be executed regardless of the View Þlter settings.
When all of the parameters in the View page are set to On, the Event list on the EVENT page
will display all of the recorded MIDI data on the selected track(s). If at least one of these view
parameters is set to Off, the View soft button on the EVENT page will be in brackets (as shown
below) indicating that you might not be seeing all of the recorded MIDI data on the selected
track(s). If you press AllOn, the brackets disappear, and youÕll see all event types.
|Cut||||Copy||Paste||[View]|AllOn||Done|
Press the Toggle soft button to switch all View Þlter parameters to the opposite of each oneÕs
currently set value.
AllOff: Available only on the View page. Sets all View Þlter parameters to Off. The only item
viewable on the EVENT page will be an END point.
AllOn: Available on both the EVENT page and the View page. Sets all View Þlter parameters to
On. This enables you to view all of the MIDI events that are on any or all tracks. If youÕre on the
View page, the Done soft button returns you to the EVENT page. The view Þlter settings will be
applied to the Event list.
Done: On the View page, returns to the EVENT page. On the EVENT page, returns to the
COMMON page.

Song Editor: The TRACK Page

This page allows you access to useful track-based edit functions. These functions are:
Erase
Copy
Bounce
Insert
Delete
Quantize
Reference Quantize
For each function, there is a set of parameters to control how the function operates, and on what
region of the selected track(s). As usual, the top line of this page displays the selected track or
tracks. Select the available current track(s) for editing by using the Chan/Bank buttons. Press
both of the Chan/Bank buttons together to select All tracks.
Shift
Transpose
Change
Thin
Remap
Grab
Song Mode and the Song Editor
Song Editor: The TRACK Page
12-47