Kurzweil K2600 Musician's Manual page 414

Sampling and Sample Editing
Editing Samples
13 Resample
F:Resample|||Start:0.000||||End:6.000|||
NewRate:20000Hz|||Quick:0|||||||||||||||
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
-6dB>|||||||||||||||||||||||||||||||||||
****************************************
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|Cut||||Copy||Paste||Samp2|||Go||||Done|
Use this function to change the sample rate of the samples in the selected segment. This is
convenient for converting samples to new rates matching those of other samples to be mixed
with or inserted into. ItÕs also useful for saving memory and altering the timbre of a sample.
If you include the entire sample in the segment, the new rate will be applied to the entire
sample, and will be saved with the sample. If you select a shorter segment, only that segment
will be modiÞed, and it will sound pitch shifted relative to the remainder of the sample. To
resample so that youÕll hear a higher pitch for the selected segment, select a lower sample rate.
For a lower pitch at the selected segment, choose a higher sample rate. This is because the K2600
applies the same playback rate to the entire sample, and doesnÕt compensate for the differing
sample rates of the sample segments.
If the loop points of a looped sample are included in the segment to be converted, the K2600 will
ask you if you want to adjust the rate slightly to optimize the loop. Press the No soft button if
you donÕt want the rate adjusted.
You can use the Quick parameter to select from two resampling routines. Use Quick 0 to get an
idea of the sound, then use Quick 1 for your Þnal take.
14 Time Warp
F:TimeWarp|||Start:0.000||||End:6.000|||
NewLen:0.000||||||||||||||||Quick:0|||||
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
-6dB>|||||||||||||||||||||||||||||||||||
****************************************
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|Cut||||Copy||Paste||Samp2|||Go||||Done|
With this function you can change the length of the selected sample segment without affecting
the pitch. This function applies sophisticated routines that lengthen or shorten the selected
sample segment to play it back over a different time period, modifying the playback rate so the
pitch remains unchanged.
The Start and End parameters deÞne the segment to be processed. Use the New Length
(NewLen) parameter to specify how long you want the resulting sample to be. While the
14-28