Kurzweil K2600 Musician's Manual page 250

Song Mode and the Song Editor
Getting Started with the Sequencer
Record a Bass Line
When you are satisÞed with your drum loop, you can begin using it as the foundation for a
song. What weÕll do here is set RecMode to Unloop while leaving PlayMode set to Loop. This
means that the drum loop will keep playing while we record new unlooped material of any
length. The endpoint of the song will change to reßect the length of the newly recorded material.
1. Press the MISC soft button to bring up the MISC page.
2. Set the RecMode parameter to Unloop. Leave the PlayMode parameter set to Loop.
3. Press the MAIN soft button to return to the MAIN page.
4. Set the recording track (RecTrk) to Track 2.
This track already has
material recorded on it.
Track status indicators: track 1 is set to Play, track 2 is set to Record.
Tracks 3 through 16 are empty.
5. Press the Record soft button to enter REC READY mode.
6. Press the Play soft button, then begin laying down a bass track.
12-8
Depending on the type of song you are recording, you may also want to turn quantization
off before you record your bass part.
SongMode:MISC||Events:186K|||STOPPED||||
RecMode|:UnLoop|Quant:100%||CountOff:1||
PlayMode:Loop|||Grid|:1/16||Click|||:Rec
KeyWait|:Off||||Swing:0%||||ClickCh|:16|
Locate||:||1:1||Sync|:Off|||ClickPrg:198
AutoIn||:||1:1||Clock:Int|||ClickKey:C|4
AutoOut|:||1:1||Tempo:Auto||ClickVel:100
Record||Play|||Stop|||New|||In/Out|MAIN|
SongMode:MAIN||Events:186K|||STOPPED||||
CurSong:200*NewSong||||||||||Tempo:100||
RecTrk|:2||||Vol:127|Pan:64||Mode|:Merge
Program:30|Warm|Bass|1^2|||||Locat:||1:1
||||||||[|||||||||||||||||||||||||||||||
Track||:P|R|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
Since you previously assigned Warm Bass 1^2 to channel 2, it should appear in the
Program parameter when you set Track 2 as the recording track. Note, too, that the track
status indicator for Track 1 changes to P (for Play) when you select Track 2 for recording.
The small square above the track status indicator tells us that material is contained on that
track.