The Slider And Slid/2 Pages - Kurzweil K2600 Musician's Manual

Setup Mode and the Setup Editor

The SLIDER and SLID/2 Pages

The SLIDER and SLID/2 Pages
You can assign each of the K2600Õs eight programmable sliders to a destination on each of the
eight zones. Or, you can assign any combination of sliders to the same zone, allowing you
tremendous ßexibility. For example, you can assign Sliders A and B to modulate pitch and
volume on Zone 1, then assign Slider C to control panning on Zones 2, 3, and 4.
The SLIDER button gives you access to Sliders AÐD. Press the SLID/2 button to program
Sliders EÐH.
Take a look at the parameters. Since all the continuous controllers work in a similar manner,
youÕll Þnd these same parameters on the CPEDAL, RIBBON, WHEEL, and PRESS pages.
EditSetup:SLIDER||||||||||||||<>Zone1/1|
||||||||||||||||||||||||||||||||||||||||
|||||||Dest:|||Scale:Add:Curv:Ent:|Exit:
SlidA:|Data|||||100%|0|||Lin||None|None|
SlidB:|MIDI22|||100%|0|||Lin||None|None|
SlidC:|MIDI23|||100%|0|||Lin||None|None|
SlidD:|MIDI24|||100%|0|||Lin||None|None|
<more||SLIDER|SLID/2|FOOTSW|CPEDAL|more>
EditSetup:SLID/2||||||||||||||<>Zone1/1|
||||||||||||||||||||||||||||||||||||||||
|||||||Dest:|||Scale:Add:Curv:Ent:|Exit:
SlidE:|MIDI25|||100%|0|||Lin||None|None|
SlidF:|MIDI26|||100%|0|||Lin||None|None|
SlidG:|MIDI27|||100%|0|||Lin||None|None|
SlidH:|MIDI28|||100%|0|||Lin||None|None|
<more||SLIDER|SLID/2|FOOTSW|CPEDAL|more>
Destination (Slider A)
Destination (Slider B)
Destination (Slider C)
Destination (Slider D)
Destination (Slider E)
Destination (Slider F)
Destination (Slider G)
Destination (Slider H)
Scale
Add
Curve
Entry Value
Exit Value
NOTE: The FOOTSW page, and all the switch-controller pages, are described following the section
called Switch Controller Parameters, which begins on page 7-32.
7-28
Parameter
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
MIDI Control Source list
±300%
-128 to +127
Curve list (see text)
None, 0–127
None, 0–127
Range of Values Default
Data
MIDI 22
MIDI 23
MIDI 24
MIDI 25
MIDI 26
MIDI 27
MIDI 28
100%
0
Lin
None
None