Speedctl; Vibchorctl; Vibchorsel; Voladjust - Kurzweil K2600 Musician's Manual

Program Mode and the Program Editor
The MISC Page

SpeedCtl

Select either Fast or Slow to choose the speed of the rotary speaker emulation. On keyboard
models, you can toggle between fast and slow speed using Assignable Controller Button 1
(Mute button 1).
When you select a KB3 program, the K2600 sends several MIDI Controller messages both locally
and to the MIDI Out port. One of those messages is Controller number 68, with a value
corresponding to the value of SpeedCtl (Slow = 0, Fast = 127).

VibChorCtl

Choose On or Off to turn on or off either vibrato or chorus (as selected with the VibChorSel
parameter). On keyboard models, you can toggle between on and off using Assignable
Controller Button 2 (Mute button 2).
When you select a KB3 program, the K2600 sends several MIDI Controller messages both locally
and to the MIDI Out port. One of those messages is Controller number 95, with a value
corresponding to the value of VibChorCtl (Off = 0, On = 127).

VibChorSel

Choose the vibrato or chorus program (there are three of each) you wish to use with this KB3
program. Note that you must set VibChorCtl (also on the MISC page) to On to hear the effect.
On keyboard models, you can select the vibrato or chorus you want using Assignable Controller
Buttons 3 and 4 (Mute buttons 3 and 4.
When you select a KB3 program, the K2600 sends several MIDI Controller messages both locally
and to the MIDI Out port. One of those messages is Controller number 93, with a value
corresponding to the value of VibChorSel (Vib1 = 0, Vib2 = 36, Vib3 = 58, Chor1 = 79,
Chor2 = 100, and Chor3 = 122).

VolAdjust

Provides an overall volume adjust for the KB3 model. Use this parameter to ÒnormalizeÓ KB3
programs with other programs.

BendRange

Controls the pitch bend range of this KB3 program.

Sustain

Set On or Off to enable or disable response to MIDI sustain (MIDI 64).

Sostenuto

Set On or Off to enable or disable response to MIDI sostenuto (MIDI 66).
6-58