Kb3 Editor: The Pitch Page; Kb3 Editor: The Amp Page - Kurzweil Flash Play PC4 Musician's Manual

Program Edit Mode

KB3 Editor: The PITCH Page

KB3 Editor: The PITCH Page
The PITCH page parameters for KB3 programs are similar to the Pitch parameters for VAST
programs on the DSP MOD page. (In KB3 programs, there are no Hz, KeyTrk, or VelTrk
parameters.) Use the Coarse and Fine parameters to transpose the entire program up or
down in semitones or cents. The parameters in the right column can be used to modulate the
pitch, and work the same as the "Pitch" modulation parameters in VAST programs. For a full
description of these modulation source and depth parameters, see
page 3-56.

KB3 Editor: The AMP Page

The AMP page parameters for KB3 programs are similar to the Level parameters for VAST
programs on the DSP MOD page. (In KB3 programs, there are no KeyTrk or VelTrk
parameters.) Use the Coarse parameter to adjust the program's pre-FX volume level up or
down in dB. The parameters in the right column can be used to modulate the volume level,
and work the same as the volume "Level" modulation parameters in VAST programs. For a
full description of these modulation source and depth parameters, see
on page
3-112
3-56.
"Subpage Parameters" on
"Subpage Parameters"