Move - Kurzweil K2600 Musician's Manual

Master Mode
Object Utilities
If you press Cancel while in one of the object utilities, you return to the Object Utilities page (the
ÒSelect database function:Ó dialog pictured above). Any objects that were selected when you
pressed Cancel will still be selected if you subsequently enter a different object utility (by
pressing a different soft button such as Name, for example). The selections are reset when you
exit the Object Utilities page (by pressing the Done button).
All of the features of the Save Object dialog are accessible here:

Move

Pressing Move from the Object Utility page takes you to the Move utility. The Move utility
allows you to select any group of objects and move them to a different bank. If you select several
objects of a single type, then you are allowed to set a speciÞc starting ID for the objects, of any
number (0-999). For example, you could move a group of samples from scattered IDs to a
continuous range of IDs starting from ID# 354.
If you move objects that are dependent objects of other objects (such as samples that are
dependents of a particular keymaps,) the parent objects are automatically relinked to their
dependents that have moved. What this means is that you can move any objects to any new ID
numbers, without having to worry if your programs, keymaps or songs will still play correctly.
Moving a Single Object
If you select a single object to move, you will see a dialog similar to the Save/Replace dialog you
see when saving any object.
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Move|Awesome|Click|to:|ID#198|||||||||||
(replace|Click)|||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||Replace|Cancel
11-14
You can use the Multiple Object Selector (described on page 13-36) to select ranges of
objects according to object types, IDs, strings in the object names, or dependent
relationships.
You can quickly select or deselect all objects using the Left/Right cursor and Up/Down
cursor double-presses.
You can audition any of the program, keymap, sample, or song objects by pressing either
the Left or Right cursor button, when the desired object is highlighted. Songs will play
until either cursor button is pressed again. To audition a program, keymap, or sample
object, play a note on your MIDI controller (after pressing the Left or Right cursor
button). K2600R owners also have the shortcut of holding the Cancel button, then
pressing the alphanumeric buttons to play notes.