Kurzweil K2600 Musician's Manual page 245

Follow these steps to assign the programs to separate channels:
1. Press the Song mode button to enter Song mode. The display will look something like
this:
Recording track is set to Track 1
SongMode:MAIN||Events:186K|||STOPPED||||
CurSong:1|NewSong||||||||||||Tempo:120||
RecTrk|:1||||Vol:127|Pan:64||Mode|:Erase
Program:1|Concert|Piano|1||||Locat:||1:1
||||||||||||||||||||||||||||||||||||||||
Track||:R|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
Notice that the sequencer is ready for you to record a new song, and the recording track
(RecTrk) is set to track 1. If 1 NewSong doesnÕt appear as the value for the CurSong
parameter, press the MISC soft button, then press the New soft button on the MISC page.
YouÕll return to the MAIN page, and CurSong will say 1 NewSong.
2. Use the Down cursor button to move the cursor to the Program parameter.
3. When this parameter is highlighted, type 54 then press the Enter button. YouÕve now
assigned Jazz Kit to channel 1.
SongMode:MAIN||Events:186K|||STOPPED||||
CurSong:1|NewSong||||||||||||Tempo:100||
RecTrk|:1||||Vol:127|Pan:64||Mode|:Erase
Program:54|Jazz|Kit|II|||||||Locat:||1:1
||||||||||||||||||||||||||||||||||||||||
Track||:R|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
4. Press the Up Chan/Bank button. This changes the RecTrk parameter to 2, but leaves the
Program parameter highlighted. Notice how the R in the Track region moves from Track 1
to Track 2. Also notice how each of the sixteen tracks has a default channel associated with
it. You could change this if you wanted to, but most people Þnd it easiest to associate track
1 with channel 1, track 2 with channel 2, and so on.
Incidentally, when youÕre assigning programs on this page, you could use the Up/Down
cursor buttons to highlight RecTrk, then change the recording track and select the
Program parameter again, but the Chan/Bank button method is more convenient.
5. On Recording Track 2, select Program 30 Warm Bass 1^2.
Song Mode and the Song Editor
Getting Started with the Sequencer
12-3