Parameters - Kurzweil K2600 Musician's Manual

Advanced KDFX
Navigating KDFX
inside the Studio Editor, however, when you press the FXBUS soft button from another page, it
will take you to whichever FXBUS page you were last looking at.
EditStudio:FXBUS|Size:1|Free:0|<>FXBus:1
FX1||14|string|lHall|||||||Aux| ||Mix
Wet/Dry|||:32%wet||||Lvl:0ff|||Lvl:0.0dB
Out|Gain||:0.0dB|||||Bal:0%||||Bal:0%
Allocation:Auto
<more||INPUT||FXBUS||AUXFX||OUTPUT|more>
The four FXBuses are the equivalent of four effects processors inserted into the effects loop of a
mixing console. Therefore, they are also known as the Insert effects.

Parameters

When you are on an FXBUS page, highlighting the name of the FX preset (or any of the
parameters directly below it) and pressing Edit accesses the Þrst page of parameters for that
FX preset. An FX preset is an object within the studio, much like a keymap is an object within a
program. The same FX preset can be used in more than one studio, or more than once in the
same studio (provided you donÕt run out of PAUs).
The Þrst EditFXPreset Parameter page includes the algorithm on which the FX preset is based.
The soft buttons take you to additional pages of parameters. Depending on how complex the
algorithm is, there may be as many as four parameter pages in an FX preset. Algorithms are in
the KDFX ROM, and are not normally changeable, deletable, or saveable by the user. Like ROM
samples, they are simply always there. (You can load additional algorithms from disk, however,
as they become available from Kurzweil.)
EditFXPreset:PARAM1||||||||EffectSize:3/3
FXAlgorithm:5|MiniVerb|||||||||||||
||||||||||||||||||||In|Gain|||:0.0dB
Wet/Dry|||:32%wet|||Out|Gain||:0.0dB
Rvrb|Time|:2.6s|||||HF|Damping:8372Hz
L|Pre|Dly|:4ms||||||R|Pre|Dly|:9ms
<more||PARAM1|PARAM2|||||||||||||||more>
Pressing the <more> soft buttons gives you access to the Name, Save, Delete, and Dump pages
for the FX preset.
Pressing Exit goes back to the FXBUS page, and if you have made any changes in the FX preset
you will be prompted to save it. If the FX preset in this bus is the same as on another bus (either
in this studio or another), then any changes you make (and save) will affect all buses using that
FX preset.
15-3