Status Screen In Ieee1394 Input Mode - JVC GY-HM750CHU Instructions Manual

Item
H
Audio Level Meter
I
Voltage/Battery
Power
J
Media Status
K
Operation Guide
Status Screen in IEEE1394
Input Mode
These are the status screens displayed in Media mode (IEEE1394 Input mode).
STATUS 1 Screen
RES
* Appears only when a warning is displayed. [Voltage/Remaining Battery Power] (A Page 108)
STATUS 2 Screen
B
1280x720
A
24p HQ
282min
D
-10 dB
-20 dB
Displays the current status of the power supply in use.
Display
12.3V
12.3V
200min
30%
RES
PLAY : Playing
STILL : Still picture playback mode
FWD * : High-speed playback in the forward direction (* playback speed: 5x or 15x)
REV * : High-speed playback in the reverse direction (* reverse playback speed: 5x or 15x)
STOP : Stop mode
POFF : Power OFF
Displays a guide for the current operation buttons.
[Event/Warning Display Area] (A Page 101)
C
Description
Displays the audio level for CH-1 and CH-2.
The positions of -20 dB and -10 dB are displayed as
Memo :
● You can turn ON/OFF the display using [Audio Meter] of [Status Display] in the
[LCD/VF] menu. (A Page 91)
Currently powered by an AC adapter. The current voltage is shown on the right.
If the supplied voltage from the AC adapter is low, the voltage value will be
displayed in red as a warning.
Currently powered by a battery.
When the battery power runs out, the battery mark appears hollow, and RES is
displayed.
Memo :
● The display on the right can be set using [Battery Info] of [Status Display] in the
[LCD/VF] menu. (A Page 91)
[Event/Warning Display Area] (A Page 101)
o
.
Description