Dual Rec - JVC GY-HM750CHU Instructions Manual

Dual Rec

If both the slots are loaded with recordable cards in the
factory default ([Slot Mode] is set to Series ), pressing the
[REC] button starts recording only to the media in the
selected slot. When the remaining space in the selected
media runs out, recording continues by automatically
activating the media in the other slot.
If both the slots are loaded with recordable cards in the Dual
Rec mode ([Slot Mode] is set to Dual ), pressing the [REC]
button starts recording simultaneously to the media in both
the slots.
The clips recorded to the media in both the slots are
identical, and backup recording can only be performed on
this camera recorder.
( A Page 76 [Slot Mode])
[REC] Button
[REC] Button
Setting to Dual Rec mode
1
Set [Slot Mode] in the [Main Menu] B [Record Set]
menu to Dual . (A Page 76)
A DUAL display appears on the status display screen.
DUAL Display
1280x720
60p HQ
OK
DUAL
A
100min
100min
B
STBY F5.6
282min
STATUS 1 Screen
Slot Status Indicator
0 0 : 0 0 : 0 0 : 0 0
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
AE+1 9dB 1/10000
2
Start recording
● Load recordable media to both slots, and press the [REC]
button.
● In the Dual Rec mode, recording to the media in both slots
starts at the same time.
● Both the card slot marks turn red, and the status
indicators of both the card slots also light up in red.
Lit in red
1280x720
60p HQ
OK
DUAL
A
100min
B 100min
F5.6
REC
282min
STATUS 1 Screen
3
Stop recording
● Press the [REC] button again.
● Recording to both slots stops, and both the card slot
marks turn white.
● The same clips are recorded to both cards.
White
1280x720
60p HQ
OK
DUAL
A
100min
100min
B
STBY F5.6
282min
STATUS 1 Screen
Memo :
● During recording in the Dual Rec mode, both the card slot
marks light up in red.
● During recording in the Dual Rec mode to two cards with a
different amount of remaining space, if the space of one
card runs out, recording to both slots will stop
automatically. After recording stops, recording
automatically resumes for the card with remaining space.
Although the clips are separated in this case, the clips can
be seamlessly joined by arranging them on the timeline of
the editing software since they are recorded seamlessly.
● If the last clip on the cards that are loaded to the two slots
are different from each other, and the time code operating
mode is set to REGEN , the Regen mode for the
selected card slot will be enabled in the next recording.
0 0 : 0 0 : 0 0 : 0 0
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
AE+1 9dB 1/10000
0 0 : 0 0 : 0 0 : 0 0
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
AE+1 9dB 1/10000