Media Menu; Setup File Manage Menu - JVC GY-HM750CHU Instructions Manual

* Default values are indicated in bold characters.
Item
Time Zone UTC-00:30 to UTC-12:00,
UTC,
UTC+14:00 to
UTC+00:30
(In increments of 30
minutes)
System
Information
Version Displays information on the firmware version.
Fan Hour For displaying the usage time of the internal fan.
Memo :
● Under normal environment, dust will accumulate on the internal fan when the camera recorder is used over a long
period. Dust may enter the camera recorder especially if it is used outdoors. This may affect the image and sound
quality of the camera recorder. Check and replace the fan after every 9000 hours (suggested guideline).

Media Menu

Item
Format Media For formatting (initializing) an SDHC card.
Select a card slot (A or B), select [Format] from [Cancel]/[Format], and press the Set button (R) to format (initialize) the
card.
( A Page 33 [Formatting (Initializing) SDHC Cards])
Restore Media For restoring an SDHC card.
Select a card slot (A or B), select [Restore] from [Cancel]/[Restore], and press the Set button (R) to restore the SDHC
card.
( A Page 34 [Restoring the SDHC Card])
Memo :
● This item appears only when the SDHC card needs to be restored. However, it is not selectable when recording in

Setup File Manage Menu

Menu settings and button operations ([SHUTTER], [AE LEVEL], etc.) can be saved.
It is useful to save settings according to different shooting conditions.
Item Setting Values
Load File...
Store File...
Reset File...
Setting Values
For setting the UTC time difference in units of 30 minutes.
[Default values: UTC-05:00 (U model), UTC (E model)]
Memo :
● If [Date/Time] is already set, the [Date/Time] item is automatically adjusted when [Time
Zone] is altered.
Camera mode and during Clip Review.
^ Loads the settings. (A Page 119)
^
Saves the settings. (A Page 118)
^ Restores the saved settings to their default values. (A Page 119)
Function
Function
Function