Status Screen In Vtr Mode - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 28 Tuesday, October 24, 2006 3:11 PM
CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor
and in the Viewfinder (Cont'd)

Status Screen in VTR MODE

1
4
5
6
7
No. Item
1 VIDEO FORMAT display
2
Time code (TC) and user's bits
(UB) display
3 Remaining tape time
4 Event display
5 Audio sampling frequency in-
dication
6 Audio level meter indication
7 VTR mode indication
28
2
3
0
9
8
Displays the video format recorded on the tape when in VTR mode. Also displays the video format of the
HDV/DV input signal.
You can switch this display ON/OFF using the VIDEO FORMAT item on the LCD/VF[1/2] menu screen.
X See page 91.
Displays the time code data being recorded (hour, minute, second, frame) when in VTR mode.
You can switch this display ON/OFF using the TC/UB item on the LCD/VF[1/2] menu screen.
X See page 91.
You can select to display either the time code or the user's bits using the TC DISPLAY switch in the LCD
door.
Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF[1/2] menu screen.
X See page 91.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be used only as a guide.
* When this device is used at low temperatures, it may take a while before the indication of the remaining
tape time appears.
Displays messages related to VTR operations. X See pages 106-108.
The audio sampling frequency used for the recording is displayed during playback.
(32 K, 48 K, 44.1 K)
Whether or not to display this item is set with the AUDIO item on the LCD/VF[1/2] menu screen.
X See page 91.
Displays the audio level meters during playback.
Whether or not to display this item is set with the AUDIO item on the LCD/VF[1/2] menu screen.
X See page 91.
Indicates the VTR operation status
STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, - - - (No tape loaded), SLOW: During variable play-
back in forward direction (Displayed when using non-linear editing software.)
(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2 speed, SLOW+3: About ×0.5 speed)
During variable playback in reverse direction (Displayed when using non-linear editing software.)
(SLOW–1: About ×–0.1 speed, SLOW–2: About ×–0.2 speed, SLOW–3: About ×–0.5 speed)
Contents