Protecting Important Scenes (Ok Mark Function) - JVC GY-HM750CHU Instructions Manual

When [Manual] is selected
A
[SPOT METER FIXED] is displayed when the switch is
flipped. The brightness of the cursor position is displayed.
B
[SPOT METER OFF] is displayed when the switch is
flipped. Displays of cursors and brightness disappear.
C
[SPOT METER SELECT] is displayed when the switch is
flipped. The cursor blinks in red.
Move the cursor with the cross-shaped button (
specify the position to display the brightness. When the
position is decided, press the Set button (
switch to confirm.
D
Returns to the state in A.
Memo :
● When moving the cursor position, [SHUTTER]/[AE
LEVEL] control is disabled.
● You can also decide the position of the cursor with the Set
button ( R ).
● When the brightness is 0 % in the entire screen, the frame
is fixed in the center.
● If the cursor is outside the 4:3 range, changing the
[Aspect Ratio] item in the [Record Format] menu from
16:9 to 4:3 restores the cursor to the default position.
(A Page 75)
You can append OK marks to the clips for important scenes.
Cursor (Green)
Clips appended with OK marks cannot be deleted, thus
protecting the important clips. In addition, you can display
only the clips with OK marks in the thumbnail display during
Media mode.
Appending OK Marks During Recording
1
the lens from the menu.
● Select [Main Menu] B [Camera Function] B [Switch Set]
● Append or delete the [OK] mark with every press of the
● When an OK mark is appended, OK appears at the top
JKH I ) to
R
) or flip the
Cursor
(Blinks in red)
Memo :
● Clips appended with [OK Mark] cannot be deleted from
● When the camera recorder is in Media mode (SD Card
● When the write-protect switch on the SDHC card is set
Protecting Important
Scenes (OK Mark Function)
Assign the OK Mark function to the [RET] button on
B [LENS RET] B OK Mark . (A Page 79)
[RET] button.
left of the status screen on the viewfinder/LCD monitor.
( A Page 102, 109)
1280x720 30/24 fps
60p HQ
OK
A
100min
B 100min
REC F5.6
282min
STATUS 1 Screen
the camera recorder using [Delete Clip]. (However, they
will be deleted when the SDHC card is formatted.)
mode), you can delete the [OK] marks appended during
recording, or append/delete [OK] marks after shooting.
( A Page 68 [Appending and Deleting OK Marks])
( is displayed), [OK] marks cannot be appended/
deleted.
OK Mark
0 0 : 0 0 : 0 0 : 0 0
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
AE+1 9dB 1/10000