Status Screen In Vtr Mode - JVC GY-HD110 Instructions Manual

Status Screen in VTR MODE

1
4
5
6
7
No. Item
1 VIDEO FORMAT display
2 Time code (TC) and user's bits
(UB) display
3 Remaining tape time
4 Event display
5 Audio sampling frequency in-
dication
6 Audio level meter indication
7 VTR mode indication
8 Time/Date indication
9 Voltage indication
0 Audio Lock indication
CONTROLS, INDICATORS AND CONNECTORS
2
3
0
9
8
Displays the video format recorded on the tape when in VTR mode.
You can switch this display ON/OFF using the VIDEO FORMAT item on the LCD/VF [2/3] menu screen.
X See page 75.
Displays the time code data being recorded (hour, minute, second, frame) when in VTR mode.
You can switch this display ON/OFF using the TC/UB item on the LCD/VF [2/3] menu screen.
X See page 75.
You can select to display either the time code or the user's bits using the TC DISPLAY switch in the LCD
door.
Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF [1/2] menu screen.
X See page 75.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be used only as a guide.
* When the unit is used at low temperatures, it may take a while before the indication of the remaining tape
time appears.
Displays messages related to VTR operations. X See page 89-90.
The audio sampling frequency used for the recording is displayed during playback.
(32 K, 48 K, 44.1 K)
Displays the audio level meters during playback.
Whether or not to display this item is set with the AUDIO item on the LCD/VF [2/3] menu screen.
X See page 75.
Indicates the VTR operation status
STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, - - - (No tape loaded), SLOW: During variable play-
back in forward direction (Displayed when using non-linear editing software.)
(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2 speed, SLOW+3: About ×0.5 speed)
During variable playback in reverse direction (Displayed when using non-linear editing software.)
(SLOW–1: About ×–0.1 speed, SLOW–2: About ×–0.2 speed, SLOW–3: About ×–0.5 speed)
Recorded data are displayed during playback, fast forward, and rewind.
During recording in DV format, the data from the IEEE1394 connector is displayed.
During recording in HDV format, the data of internal clock is displayed.
(GY-HD110U/GY-HD111E only)
Whether or not the date and time should be displayed and the display style are set on the TIME/DATE
menu screen. X See page 79.
When the date and time have not been set, the following indication appears.
- -/- -/- - - -: - -: - -
(Example) 7.0V : Indicates remaining battery level in 0.1V steps.
Displayed when the audio signal from DV recording or playback is locked to the video signal.
Contents
25