Status Screen In Vtr Mode - JVC GY- HD101 Instruction Manual

Status Screen in VTR MODE

1
4
5
6
7
No. Item
1 VIDEO FORMAT display
2 Time code (TC) and user's bits
(UB) display
3 Remaining tape time
4 Event display
5 Audio sampling frequency in-
dication
6 Audio level meter indication
7 VTR mode indication
8 Time/Date indication
9 Voltage indication
0 Audio Lock indication
CONTROLS, INDICATORS AND CONNECTORS
2
3
0
9
8
Displays the video format recorded on the tape when in VTR mode.
You can switch this display ON/OFF using the VIDEO FORMAT item on the LCD/VF [2/3] menu screen.
X See page 72.
MEMO
This camcorder cannot play back or output tape recorded in HDV 1080i format. "INVALID TAPE!" is dis-
played in the event display area 4.
Displays the time code data being recorded (hour, minute, second, frame) when in VTR mode.
You can switch this display ON/OFF using the TC/UB item on the LCD/VF [2/3] menu screen.
X See page 72.
You can select to display either the time code or the user's bits using the TC DISPLAY switch in the LCD
door.
Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF [1/2] menu screen.
X See page 72.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be used only as a guide.
* When the unit is used at low temperatures, it may take a while before the indication of the remaining tape
time appears.
Displays messages related to VTR operations. X See page 85-86.
The audio sampling frequency used for the recording is displayed during playback.
(32 K, 48 K, 44.1 K)
Displays the audio level meters during playback.
Whether or not to display this item is set with the AUDIO item on the LCD/VF [2/3] menu screen.
X See page 72.
Indicates the VTR operation status
STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, - - - (No tape loaded), SLOW: During variable play-
back in forward direction (Displayed when using non-linear editing software.)
(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2 speed, SLOW+3: About ×0.5 speed)
During variable playback in reverse direction (Displayed when using non-linear editing software.)
(SLOW–1: About ×–0.1 speed, SLOW–2: About ×–0.2 speed, SLOW–3: About ×–0.5 speed)
Recorded data are displayed during playback, fast forward, and rewind.
During recording, the data from the IEEE1394 connector is displayed.
(GY-HD100U/GY-HD101E only)
Whether or not the date and time should be displayed and the display style are set on the TIME/DATE
menu screen. X See page 76.
When the date and time have not been set, the following indication appears.
- -/- -/- - - -: - -: - -
(Example) 7.0V : Indicates remaining battery level in 0.1V steps.
Displayed when the audio signal from DV recording or playback is locked to the video signal.
Contents
25