Table of Contents
Advertisement
CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor
and in the Viewfinder (Cont'd)
Status Screen in VTR MODE
1
2
3
4
5
0
6
9
7
8
No.
Item
1
HDV/DV input signal.
You can switch this display ON/OFF using the VIDEO FORMAT item on the LCD/VF[1/2] menu screen.
X See page 88.
2
(UB) display
You can switch this display ON/OFF using the TC/UB item on the LCD/VF[1/2] menu screen.
X See page 88.
You can select to display either the time code or the user's bits using the TC DISPLAY switch in the LCD
door.
3
This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF[1/2] menu screen.
X See page 88.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be used only as a guide.
* When this device is used at low temperatures, it may take a while before the indication of the remaining
tape time appears.
Displays messages related to VTR operations. X See pages 102-104.
4
Event display
5
dication
(32 K, 48 K, 44.1 K)
Whether or not to display this item is set with the AUDIO item on the LCD/VF[1/2] menu screen.
X See page 88.
6
Whether or not to display this item is set with the AUDIO item on the LCD/VF[1/2] menu screen.
X See page 88.
7
VTR mode indication
Indicates the VTR operation status
STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, - - - (No tape loaded), SLOW: During variable play-
back in forward direction (Displayed when using non-linear editing software.)
(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2 speed, SLOW+3: About ×0.5 speed)
During variable playback in reverse direction (Displayed when using non-linear editing software.)
(SLOW-1: About ×-0.1 speed, SLOW-2: About ×-0.2 speed, SLOW-3: About ×-0.5 speed)
28
Contents
No.
Item
8
Time/Date indication
Recorded data are displayed during playback, fast forward, and rewind.
During recording in DV format, the data from the IEEE1394 connector is displayed.
During recording in HDV format, the data of internal clock is displayed.
(HDV/DV signal input is possible with the GY-HD200U, GY-HD201E.)
Whether or not the date and time should be displayed and the display style are set on the TIME/DATE
menu screen. X See page 92.
When the date and time have not been set, the following indication appears.
- -/- -/- - - -: - -: - -
9
Voltage indication
(Example) 12.2V : Indicates remaining battery level in 0.1V steps.
Battery voltage and remaining battery are displayed. Select the display method in BATTERY INFO. on the
LCD/VF[1/2] menu screen X See page 88.
Anton Bauer battery: Voltage/remaining capacity (%)/remaining time
IDX Endura battery : Voltage/remaining capacity (%)
0
Audio Lock indication
Displayed when the audio signal from DV recording or playback is locked to the video signal.
Magnified Status Indications on the
LCD Monitor
The characters on the status screens can be showed alone
in magnified size on the LCD monitor.
DISPLAY button
1.
Set the LCD+VF item on the LCD/VF[4/4] menu screen to ON. X See page 89.
2.
When the DISPLAY button is briefly pressed while the LCD monitor is displayed, the displayed contents change every time the
DISPLAY button is pressed.
Only image displayed
Characters shown enlarged
Image and characters displayed
No.
Item
1
Audio Lock Indicator
Displayed during recording and playback when the audio signal is locked to the video signal.
2
Time Code Generator Setting
Indicates the set status of the TC GENE switch on the side section.
Indicator
FREE : TC GENE switch is set to PRESET-FREE RUN MODE.
RECR : TC GENE switch is set to PRESET-REC RUN MODE.
REGN : TC GENE switch is set to REGEN MODE.
DUPL : There is 1394 input in VTR mode and TC DUPLI. menu is set to ON.
3
Drop/Non-drop Indicator
Indicates the framing mode of the time code.
DF
: Drop frame mode
NDF
: Non-drop frame mode
4
Indication of DR-HD100 Oper-
When a DR-HD100 (HDD unit by FOCUS enhancements) is connected, its operation status is displayed.
ation
(For details, refer to the DR-HD100 INSTRUCTION MANUAL.)
MEMO
When characters indicating the status are displayed in
magnified size on the LCD monitor, the viewfinder display
the image.
Contents
1
266S DD
4
2
3
Contents
29
Advertisement
Table of Contents
