Switch Set Item - JVC GY-HM750CHU Instructions Manual

Switch Set Item

* Default values are indicated in bold characters.
Item Setting Values
FAW None
PRESET
A
B
GAIN L ALC, 18dB, 15dB,
12dB, 9dB, 6dB, 3dB,
GAIN M
0dB
GAIN H
USER1 By assigning one of the following functions to each of the [USER1]/[USER2]/[USER3] buttons, these buttons can be
used to control the assigned function (on/off, start, switch).
USER2
Set according to the shooting conditions. Usable only in the Camera mode.
USER3
(Default values USER1: Bars, USER2: B.Stretch3, USER3: Load File)
None
Bars
Load File
Clip Review
B.Stretch1
B.Stretch2
B.Stretch3
B.Stretch4
B.Stretch5
B.Compress1
B.Compress2
B.Compress3
B.Compress4
B.Compress5
LENS RET Clip Review
OK Mark
Focus Assist
Return
Clip Review Last 5 sec
Top 5 sec
CLIP
For assigning the FAW (Fulltime Auto White Balance) function to a position on the [WHT.BAL.]
selection switch.
This is fixed at FAW when the [FULL AUTO] switch of the camera recorder is set to ON .
None
PRESET
A
B
For setting the gain value of each position on the [GAIN] selection switch.
This is fixed at ALC when the [FULL AUTO] switch of the camera recorder is set to ON .
(Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 18dB)
Setting Values
No function is assigned.
Assigns the function of [Bars] in the [Camera Function] menu. (A Page 78)
Assigns the function of [Load File] in the [Setup File Manage] menu. (A Page 95)
Assigns the Clip Review function. (A Page 56)
Assigns the functions of [Stretch Level] and [Compress Level] under [Black Toe] in the
[Camera Process] menu. (A Page 82)
For assigning a function to the [RET] button on the lens. This function does not work if the [RET]
button is not available on the lens in use.
Clip Review
OK Mark
Focus Assist
Return
Memo :
● The Return setting is enabled only when VF-HP790G is connected, and [SDI RETURN] in
the [VIDEO FORMAT] menu of VF-HP790G is set to ON . Also, return images only appear
on VF-HP790G, and will not be displayed on the LCD monitor of this camera recorder.
For specifying the operation when [LENS RET] is set to Clip Review .
Last 5 sec
Top 5 sec
CLIP
Memo :
● Selectable when [LENS RET] is set to Clip Review , or when any of the [USER1]/[USER2]/
[USER3] buttons is set to Clip Review .
Function
: FAW function is not assigned.
: Assigns FAW to the PRESET position.
: Assigns FAW to the A position.
: Assigns FAW to the B position.
Description
: Assigns the Clip Review function to the [RET] button. (A Page 56)
: Assigns the OK mark function to the [RET] button. This function operates
during shooting. (A Page 55)
: Assigns the Focus Assist function to the [RET] button. (A Page 37)
: Assigns the return video display function to the [RET] button.
: Views about 5 seconds of the clip from the ending.
: Views about 5 seconds of the clip from the beginning.
: Views the entire clip.