Turning On/Off The Power - JVC GY-HM750CHU Instructions Manual

Hd memory card camera recorder
Hide thumbs Also See for GY-HM750CHU:
Table of Contents

Advertisement

Turning On/Off the Power

Turning On the Power
1
Set the [POWER] switch to ON .
The camera recorder starts up in Camera mode.
Memo :
● The camera recorder always start up in Camera mode
when the [POWER] switch is set to ON .
● Press the [CAM/MEDIA] button to switch to a different
mode. The operation mode indicator changes as below.
See [Operation Mode] (A Page 8) for details of each
operation mode.
● During Camera mode
● During Media mode (SD Card mode) : Lights up in green
● Media Mode (IEEE1394 Input Mode) : Lights up in orange
● During USB mode
● During mode switching
Memo :
● The camera recorder will switch to IEEE1394 Input mode
only when the IEEE1394-connected equipment is in
operation.
[POWER] Switch
: Lights up in blue/
purple
: Lights up in orange
: Blinks in the color of
the new mode
[CAM/MEDIA] Button
[MENU] Button
Cross-Shaped
Button
JKH I
(
Set Button
R
(
)
[CANCEL]
Button
[REC] Button
Camera Mode
Camera images are output on the viewfinder and LCD
monitor. When a recordable SDHC card is inserted, the
camera recorder enters the recording standby mode.
STBY appears on the operation mode display area of the
LCD monitor and viewfinder.
Press the [REC] trigger button to start recording.
Memo :
● Playback of SDHC card is not possible in Camera mode.
However, you can use the Clip Review function to check
the most recently recorded video clip. (A Page 56)
Media Mode (SD Card Mode)
This mode allows you to play back or delete clips recorded
on the SDHC card.
When a playable SDHC card is inserted, the thumbnail or
playback screen is output on the viewfinder and LCD
monitor.
Media Mode (IEEE1394 Input Mode)
This mode allows you to check IEEE1394 input signals.
When playable IEEE1394 signals are input, input images are
output on the viewfinder and LCD monitor. IEEE1394 input
signals cannot be recorded.
Turning Off the Power
Set the camera recorder to the recording standby or stop
mode.
1
Set the [POWER] switch to OFF .
2
Remove the battery and the power to the [DC INPUT]
terminal (when not in use for a long time).
Note :
● Do not set the [POWER] switch to OFF during
recording. Check that the operation mode display is
STBY or STOP before you turn off the power.
)
● If you have mistakenly set the [POWER] switch to OFF
during recording, wait for 5 seconds or more before you
turn on the power again.
● When turning off the power, first set the [POWER] switch
of the camera recorder to OFF . Do not remove the
battery or turn off the AC power while the [POWER] switch
is set to ON .

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gy-hm750uGy-hm750eGy-hm750cheGy-hm750cche

Table of Contents