JVC GY-HM750CHU Instructions Manual page 98

Menu Display and Detailed Settings
Others Menu (continued)
* Default values are indicated in bold characters.
Item
1394 Rec Trigger Ext
Series
Split
Synchronize
Off
1394 Auto Power Enable
Off Disable
Mode LED On
Off
Reset All
Date/Time
Setting Values
For setting the recording trigger for the external recording device connected to the
[IEEE1394] terminal.
Ext
Series
Split
Synchronize : Outputs recording trigger simultaneously to the internal and external
Off
Memo :
● This item is selectable only in Camera mode. It cannot be set when recording is in
progress on the camera recorder or an external device.
● When the external recording device connected to the [IEEE1394] terminal switches to
the recording mode according to the settings, switching of operation mode using the
[CAM/MEDIA] button and the Clip Review function will be disabled.
● When [1394 Rec Trigger] is set to Split , the [REC] button on the side of the camera
recorder becomes a Rec Start/Stop button for the external device. (A Page 12)
● When the [REC] button is pushed immediately after the power is turned on or after a
menu setting is changed, recording with the external device might start about 10
seconds late.
For setting whether to automatically turn off the power of the external recording device
connected to the [IEEE1394] terminal when the [POWER] switch of the camera recorder is
turned off.
Enable : Turns off the power automatically.
Disable : Disables this function.
Memo :
● The IEEE1394 control is only valid for external devices with a POWER OFF button.
For specifying the illumination settings of the operation mode indicator on the side control
panel of the camera recorder.
On
Off
^
Resets all menu settings.
Select [Reset All] in the Reset menu and press the Set button (R). The message
Resetting... appears. After the resetting process is complete, the message Complete
appears for about 1 second. Reset will not be performed if [Cancel] is selected.
Memo :
● [Date/Time] (A Page 94) and [Time Zone] (A Page 95) cannot be reset.
● This item is not selectable when recording in Camera mode, during Clip Review, and in
Media mode.
^
For setting the year, month, day, hour, and minute.
Memo :
● The display order of the date (year, month, and day) follows the [Date Style] setting in
the [Status Display] menu. However, the 24-hour format is used for the hour display
regardless of the [Time Style] setting. (A Page 91)
: Outputs recording trigger to the external system only. (Recording is not
performed by the internal system.)
: Outputs recording trigger to enable consecutive recording by the internal
and external systems.
: Outputs separate recording triggers to the internal and external systems.
systems.
: Recording trigger is not output to the external system.
: Lights up as below according to the operation mode. (A Page 8)
: Turns off the indicator.
Operation Mode
Camera Mode
Media Mode (SD Card Mode)
Media Mode (IEEE1394 Mode)
USB Mode
Function
Blue/Purple
Color
Green
Orange
Orange