Status Screen In Ieee1394 Input Mode - JVC LST0904-001B Instruction Manual

Status Screen
Status Screen in IEEE1394
Input Mode
These are the status screens displayed in Media mode (IEEE1394 Input mode).
STATUS 1 Screen
RES
* Appears only when a warning is displayed [Voltage/Battery Power] (A Page 102 )
STATUS 2 Screen
B
1280x720
A
24p HQ
282min
D
Item
A
Frame Rate/Bit Rate
B
Resolution
C
Audio Level Meter
D
Voltage/Battery
Power
[Event/Warning Display Area] (A Page 95 )
C
Displays the frame rate and bit rate in pairs. (60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p
HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p HQ, 24p SP)
Displays the video image resolution. (1920 1080, 1440 1080, 1280 720)
-10 dB
-20 dB
Displays the current status of the power supply in use.
Display
12.3V
12.3V
200min
30%
RES
[Event/Warning Display Area] (A Page 95 )
Description
Displays the audio level for CH-1 and CH-2.
When the input sampling frequency is set to a value other than 48K in IEEE1394
mode, a mark is displayed with the frequency. (32k, 44.1k)
The positions of -20 dB and -10 dB are displayed as
Memo:
● You can turn ON/OFF the display using [Audio Meter] of [Status Display] in the
[LCD/VF] menu. (A Page 85)
Currently powered by an AC adapter. The current voltage is shown on the right.
If the supplied voltage from the AC adapter is low, the voltage value will be
displayed in red as a warning.
Currently powered by a battery.
When the battery power runs out, the battery mark appears hollow, and RES is
displayed.
Memo:
● The display on the right can be set using [Battery Info] of [Status Display] in the
[LCD/VF] menu. (A Page 85)
o
.
Description