Awoco RH-C06-A-FC Owner's Manual page 11

RANGE HOOD CARE
• Reach into the Hood Unit and push the Lamp
out from the inside of the Hood Unit.
Push the lamp out
• Disconnect the wires.
• Connect the wires to the new Lamp.
• Align and put the new Lamp back into position.
• Press the edge of the new Lamp until it
touches the bottom of the Hood Unit.
• Put the Baffle Filter back into place.
• Plug in the range hood, or turn on the breaker.
• Check if the new Lamp is working properly.
Remove
Baffle
Filters
11