Related Manuals for Awoco SP-06
Summary of Contents for Awoco SP-06
- Page 1 Ver. RH-SP-BLW-2020A Optional Awoco Split Hood Unit Optional Control Unit OWNER'S MANUAL Range Hood Test Run Before Installation In-Line Split Blower Unit...
-
Page 2: Table Of Contents
Step 1a. If the Awoco Split Hood Unit or the Control Unit is purchased Step 1b. If the Awoco Split Hood Unit or the Control Unit is NOT purchased Step 1c. Connect the Blower Unit to the Control Panel on the Existing Range Hood... -
Page 3: Important Safety Instructions
/www.awoco.com and download a digital version. WARNING Note TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR • For SP-06 model: This model has a built-in PERSONAL INJURY, PLEASE READ THE FOLLOWING damper. Additional damper is CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, not needed. -
Page 4: How To Test Run
How to Test Run Steps to Test Run Before Installing 1. 1a. This Blower Unit works best with an Awoco Split Hood Unit or a Control Unit. (The Awoco Split Hood Unit or the Control Unit must be purchased separately.) •... -
Page 5: Step 1B. If The Awoco Split Hood Unit Or The Control Unit Is Not Purchased
How to Test Run (Continued) 1b. If the Awoco Split Hood Unit or the Control Unit is NOT purchased • Connect the wires from the Blower Unit with the wires from the Power Cord as shown below: Speed Speed Neutral... -
Page 6: Step 1C. Connect The Blower Unit To The Control Panel On The Existing Range Hood
How to Test Run (Continued) 1c. Connect the Blower Unit to the Control Panel on the Existing Range Hood from other brands • Identify the Neutral wire and the Speed wires from your existing Range Hood. Please note that your Range Hood might be 3 speeds or 2 speeds only. -
Page 7: Installation
• Connect the wires: • If you have purchased the Awoco Split Hood Unit or the Control Unit • Refer to Step 1a in Page 5 to connect the wires. Install the Control Unit on the wall or other suitable places. -
Page 8: Control Unit Buttons & Functions
• Power WARNING • Press the Power button once and the Awoco Split Hood Unit or the Control Unit will be Read all instrutions and warnings in the Range Hood User activated in standby mode, then press one Manual before using the hood. -
Page 9: Troubleshooting
• If the Awoco Split Hood Unit or the Control Unit has no power to the Blower Unit, contact Awoco to get circuit board and button panel replacements. • If one of the LED light is off, contact Awoco to get a LED bulb The LED light is off from the replacement. -
Page 10: Warranty
Provide the product identification information, such mentioned above, subject to the conditions and as model number and lot number, and proof of limitations set forth below, Awoco will, at our options, original purchase. either repair or replace any part of our products •... - Page 11 Website: www.awoco.com Customer Support: 1-888-412-3428...
Need help?
Do you have a question about the SP-06 and is the answer not in the manual?
Questions and answers