HP Kayak XW A2-U2-W2 User Manual page 72

3 Troubleshooting Your PC Workstation
If Your PC Workstation Does Not Start Properly
e Turn off the PC Workstation, disconnect the power cable, and
remove the cover.
f Set the system board switch 6 (CONFG) UP to retain the
configuration.
2 Replace the cover, and reconnect the power and cables.
3 Switch on the PC Workstation. An error message will be displayed
similar to this:
"Incorrect PC Configuration"
The PC Workstation will stop. Press
errors) and then press CTRL-ALT-DEL to re-boot.
4 Run Setup by pressing
automatically downloaded and saved.
5 Make any other changes you want and press
configuration and exit from Setup.
58 English
(to view the system
. CMOS default values will be
to save the