Unpacking Your Pc Workstation - HP Kayak XA User Manual

WARNING
Operating System
Installation Tools
1 Setting Up and Using Your PC Workstation

Unpacking Your PC Workstation

Unpacking Your PC Workstation
1 When you receive your PC Workstation, unpack all the components.
If you have any doubt that you can lift the computer or display safely,
do not try to move it without help.
Computer Power Cord
Computer
Headset
Keyboard
2 Place the computer on a sturdy desk near to easily accessible power
outlets, with enough space for the keyboard, mouse, and any other
accessories. You can either place the computer horizontally (flat on
the desk) or vertically (on its side), with the flexible disk drive at the
top.
3 Position the computer so that its rear connectors are easily
accessible.
4 Position the display and computer close to each other.
Your PC Workstation's operating system is preloaded on the hard disk.
No tools are required to set up your PC Workstation. However, if you
plan to install a disk drive or an accessory board, you will need a flat-
blade screwdriver. For further information about installing accessories,
refer to "Installing Accessories in Your PC Workstation" on page 25.
2 English
Mouse
Manuals
CD-ROM Kit
Typical Display
Display Power Cord