Maintenance Menu Parameters - Ricoh P7575 Operating Instructions Manual

Making Printer Settings Using the Control Panel
❒ [Comm. Mode], [Channel], [Trans. Speed], [WEP Setting], and [SSID] can be select-
ed on the [Host Interface] menu.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {T} or {U} key to display [Maintenance], and then press the {#
Enter} key.
C
Press the {T} or {U} key to display [WL.LAN Defaults], and then press the
{# Enter} key.
D
Press the {# Enter} key.
The wireless LAN setting is reset.
After about three seconds, the initial screen appears.

Maintenance menu parameters

This section explains about parameters that can be set on the Maintenance
menu.
❖ Registration
You can adjust the starting position of the printing page.
❖ Prt. Test Sheet
You can print the registration sets sheet.
• Tray 1, Tray 2, Tray 3, LCT, Bypass Tray, Duplex.BackSide
❒ Only the installed trays appear on the display panel.
❖ Adjustment
You can select the start position for printing on a page.
• Vert: Tray 1, Vert: Tray 2, Vert: Tray 3, Vert: LCT, Vert: Bypass, Vert:
Dup. Back, Horiz.:All Trays
147