Ricoh P7575 Operating Instructions Manual page 191

Preparing for Printing
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next].
F
Click [Add Port:].
G
Select [LPR Port], and then click [OK].
H
Enter the printer's IP address in the [Name or address of server providing lpd
box] box.
I
Enter "lp" in the [Name of printer or print queue on that server] box, and then
click [OK].
J
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
K
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
L
Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
M
Restart the computer to complete installation.
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
48