Ricoh P7575 Operating Instructions Manual page 92

Troubleshooting
Messages/Second mes-
sages
No Files exist
Open Front Cover
Reset B2 Lever
P=XX I=XXXXXXXX
Power Off On
Call Service if
error reoccurs
RC Gate
connection error
Remove Misfeed
A,U: Internal
Remove Misfeed
B-F: Internal
Remove Misfeed
Q: Interposer
Remove Misfeed
R: Finisher
Remove Paper
from Duplex Unit
Remove Paper
Finisher Tray #
Remove Paper
Finisher Tray 2
Remove Paper
Fin. Upper Tray
Causes
There are no files avail-
able for Sample Print or
Locked Print.
B2 lever is not set correctly Open the front cover, then reset the
Controller error. The SC
number indicates the prob-
lem.
Cannot communicate with
Remote Communication
Gate.
Paper is jammed in the
specified input paper tray
or LCT.
Paper is jammed in the in-
ternal paper feed path.
Paper is jammed in the In-
terposer.
Paper is jammed in the fin-
isher.
Paper left in Duplex Unit.
Finisher Tray # is full of pa-
per.
Cannot output to Finisher
Tray 2 because paper sta-
pled at center and normal
paper is mixed. (Booklet)
Finisher Upper tray is full
of paper.
Solutions
You can identify the files unavailable
for printing from the error list.
B2 lever correctly.
Turn the power switch to standby,
and then ON. If the message ap-
pears again, call your service provid-
er. Report the error code that
appears.
Call your service provider.
Open the front or LCT cover, and
then remove jammed paper.
See p.113 "Remove Misfeed A, U:
Internal".
Open the front cover and remove
jammed paper.
See p.108 "Remove Misfeed B-F: In-
ternal".
Remove paper from the Interposer,
and then reload paper.
See p.115 "Remove Misfeed Q: In-
terposer".
Open the finisher cover and remove
jammed paper.
See p.118 "Remove Misfeed R: Fin-
isher".
Open Duplex unit cover and remove
paper.
Remove paper.
Remove paper.
Remove paper.
92