Ricoh P7575 Operating Instructions Manual page 60

Paper and Other Media
Enabled paper feeding tray Any input tray can be used.
Number of sheets that can
be set
Both-side printing
Additional cautions
Thick Paper
Paper thickness
Printer setup
Printer driver setup
Enabled paper feeding tray Any input tray can be used.
Number of sheets that can
be set
Both-side printing
Additional cautions
OHP transparencies
Printer setup
Printer driver setup
Enabled paper feeding tray Bypass tray
• Tray 1: 1550×2
• Tray 2, Tray 3: 550
• Bypass Tray: 100
❒ Make sure paper is not stacked higher than the upper limit
mark (T) inside the tray. Make sure paper is not stacked higher
than the paper guides inside the bypass tray.
Possible
When printing on 91 - 105 g/m
er than when printing on paper of 60 - 91 g/m
2
105 - 127.9 g/m (28 - 34 lb.) (Tray 1-3)
2
105 - 216 g/m (28 - 57 lb.) (Bypass Tray)
Press [Paper Input] menu, [Paper Type] and then [Thick Paper] on the
control panel.
❒ The paper type selected using the printer driver overrides that
selected using the control panel.
Click [Thick] in the [Type:] list.
Make sure paper is not stacked higher than the upper limit mark
(T) inside the tray. Make sure paper is not stacked higher than the
paper guides inside the bypass tray.
2
105 - 127.9 g/m (28 - 34 lb.): possible
Print speed is slightly slower than when using plain paper.
Press [Paper Input] menu, [Paper Type], and then [Transparency] on
the control panel.
❒ The paper type selected using the printer driver overrides that
selected using the control panel.
Click [Transparency] in the [Type:] list.
2
paper, print speed is slightly slow-
2
.
60