Ricoh P7575 Operating Instructions Manual page 53

Installing the Printer Driver
E
After reading the agreement, click [I accept the agreement], and then click
[Next].
F
Select the printer model you want to use in the [Select Printer] dialog box.
❒ For network connection via TCP/IP, select the printer whose IP address is
displayed in [Connect To].
❒ For parallel connection, select the printer whose printer port is displayed in
[Connect To].
G
Click [Install].
The printer driver installation starts.
H
Click [Finish]
A message about restarting the computer may appear. Restart the computer
to complete installation.
I
Click [Exit] in the first dialog box of the installer, and then take out the
CD-ROM.
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete. Restart the computer, and then reinstall the other software
or printer drivers.
❒ Auto Run may not work under certain operating system settings. If this is
the case, launch "Setup.exe" on the CD-ROM root directory.
❒ Select a printer to whose IP address is displayed in [Connect To] to install
SmartDeviceMonitor for Client when using TCP/IP.
Quick Install is not available unless you have enabled bidirectional commu-
nication between the printer and computer via parallel connection. See "In-
stall SmartDeviceMonitor for Client from the CD-ROM provided.", Software
Guide, for details about bidirectional communication between the printer
and the computer.
53