Table of Contents
Advertisement
Maintenance Menu Parameters
Menu
Image Density
Registration
Curl Prevention
ROM Update
HDD Format
You can select the print image density.
-3 to 3
Reference
For more information, see p.97 "Adjusting the Image Densi-
ty".
❖ ❖ ❖ ❖ Prt. Test Sheet
You can print the registration test sheet.
Tray 1, Tray 2, Tray 3, Bypass Tray, Duplex backside
Note
❒ Default : Tray 1
❒ Only the installed trays appear on the panel display.
❖ ❖ ❖ ❖ Adjustment
You can select the start position for printing on a page.
Horiz.: Tray 1, Horiz.: Tray 2, Horiz.: Tray 3, Horiz.: Bypass,
Horiz.: Dup.Back, Vert.: All Trays, Vert.: Dup.Back
-4 to 4
Note
❒ Default : Horiz.: Tray 1
❒ The registration value is not a default.
❒ Only the installed trays appear on the panel display.
Reference
For more information, see p.98 "Adjusting the Registration
of the Trays".
You can control the fuser temperature to prevent paper from curl-
ing.
Note
❒ Default: Off
❒ Use this mode only when paper misfeed occurs frequently
during duplex printing.
This menu is not currently used.
After installing the Hard Disk Drive, format it.
Note
❒ This menu appears only when the optional Hard Disk Drive is
installed.
Reference
For more information about formatting the Hard Disk Drive,
see p.119 "Formatting Hard Disk Drive Type 2600".
Maintenance Menu
Description
6
115
Advertisement
Table of Contents
