Ricoh P7575 Operating Instructions Manual page 166

Preparing for Printing
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe"on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next].
F
Click [Local Printer], and then click [Next].
A dialog box for selecting the printer manufacturer and model name appears.
G
Select the name of the printer whose driver you want to install, and then
click [Next].
H
In the [Available ports:] box, click [Printer Port], and then click [Next].
I
Change the printer name if you want, and then click [Next].
Select the [Yes] check box to configure the printer as default.
J
Specify whether or not to print a test page, and then click [Finish].
K
On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
L
Click the icon of the printer you want to use. On the [File] menu, click
[Properties].
M
On the [Details] tab, click [Add Port...].
N
Click [Other] in the [SmartDeviceMonitor] list, and then click [OK].
O
Click [NetBEUI], and then click [Search].
A list of printers using [NetBEUI] appears.
P
Click the printer you want to use, and then click [OK].
23