Ricoh P7575 Operating Instructions Manual page 196

Preparing for Printing
❒ If you print from a print server connected to the printer using the SmartDevice-
Monitor port, the client cannot use Recovery Printing and Parallel Printing.
❒ If you print with a Windows XP or Windows Server 2003 print server, Smart-
DeviceMonitor notification functions may not be possible for the client.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next].
F
Click [Network printer] and then click [Next].
G
Click [Next].
H
Double-click the computer name you want to use as a print server in the
[Shared printers] window.
I
Select the printer you want to use, and then click [Next].
J
The printer driver installation starts.
K
Click [Next >].
Select the [Yes] check box to configure the printer as default.
L
Click [Finish].
Restart the computer to complete installation.
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
53