Punch - Ricoh P7575 Operating Instructions Manual

Other Print Operations
• If paper sizes are mixed when a different paper size is specified during a
print job.
• When staples have run out.
• When feeding paper from the bypass tray.
• When staples have run out and Auto Continue is set, printing will continue
without stapling after the message has been displayed.

Punch

With the optional finisher installed, holes can be punched into printed output.
Punch Position
The specified punch position varies depending on paper feed and print data ori-
entation. The following table shows punch positions:
❒ Punch positions will vary slightly from page to page as holes are punched into
each sheet individually.
For information about paper sizes that can be punched, see "Specifications",
Printer Reference.
For printing methods, see the printer driver Help.
The punch position will vary when using the PostScript 3 printer driver. For de-
tails, see the PostScript 3 printer driver Help.
Punching Precautions
❒ Punching cannot be done when paper is fed from the bypass tray.
121