Settings Related To Wait Time; Timeout For Manual Feeding; [Manual-Feed Timeout] - Fujitsu FI-6750S Operator's Manual

Chapter 9 Operational Settings

9.6 Settings Related to Wait Time

Timeout for Manual Feeding

[Manual-feed timeout]

In Manual Feeding mode where you manually load documents
sheet by sheet, you can scan multiple batches of documents
continuously as a single file when you load the second stack
of document before the timeout time after loading the first
batch.
When the time has elapsed, the scanning terminates automat-
ically, canceling manual feeding.
You can cancel the Manual Feeding mode immediately by
pressing the [Send to] button within the timeout period speci-
fied.
1
Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (on page
156).
2
From the tree listing on the left, select [Device Setting 2]
[Manual-feed timeout].
3
Select whether to enable or disable [Manual feed timeout].
To enable the timeout setting, select the timeout period for manual
feeding until loading the next document after the previous one.
When [Manual feed timeout] is enabled, the scanner
waits for the document to be loaded within the specified
timeout period, even if scanning starts with no document
loaded in the ADF Paper Chute.
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
186