Changing The Adf Position (Flatbed Type Only) - Fujitsu FI-6750S Operator's Manual

Chapter 2 Loading Documents

2.3 Changing the ADF Position (Flatbed Type Only)

This section describes how to change the ADF position.
1
Raise the Stacker.
2
Holding the handle, lift up the Document Cover.
3
Remove the ADF Lock Screws, and fix them to the Lock
Screw Storage Holes.
ADF Lock Screw
Make sure that the ADF Lock Screws have been inserted
into the Lock Screw Storage Holes.
4
Gently close the Document Cover.
Lock Screw Storage Hole
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
48