Bypassing Multifeed Detection For A Fixed Format - Fujitsu FI-6750S Operator's Manual

Chapter 5 Various Documents

Bypassing Multifeed Detection for a Fixed Format

If you attempt to scan a document sheet with a sticky note,
receipt, or photo glued on it while the Multifeed Detection
function is enabled, the scanner could mistakenly judge this as
a multifeed error and discontinue the scanning. To resolve
such a problem, the "Intelligent Multifeed Function" is
provided.
There are two modes to this function. In one mode, you can
suppress multifeeds forcibly by operating the Operator Panel
on the scanner. In the other mode, you can suppress multi-
feeds automatically by letting the scanner learn the locations
and sizes of the sticky note, glued receipt or glued photo
beforehand.
Sticky note
Receipt or photo
Document
Intelligent Multifeed Function
Use this function when you want to continue scanning while
checking if any sticky notes are attached to the document
each time the multifeed error occurs.
Mode
Manual Mode The scanner stops scanning each time a multi-
(Bypass by Opera- feed error is detected. You can resume scanning
tor Panel button) after checking for any glued paper on your
document on detection of each multifeed error.
Auto Mode 1 Used to scan a document stack with paper of the
(Bypass by length same size glued at the same position.
and position)
Auto Mode 2 Used to scan a document stack with paper of
(Bypass by length) different sizes glued at different positions.
Irregular (incomplete or deformed) images may be created
when multifeeds occur.
To select one of the modes above, use the Software Operation
Panel.
For details, refer to "Setting A Non-Multifeed-Detection Range
[Intelligent Multifeed Function]" (on page
Description
185).
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
110