Pickup Errors Occur Frequently - Fujitsu FI-6750S Operator's Manual

Chapter 8 Troubleshooting

Pickup errors occur frequently.

.1
Does the document satisfy the requirements described in
Precautions in "Paper Quality" (page
YES
Did you fan the document before loading it on the ADF
Paper Chute?
YES
Are all the consumables ( *1 ) installed correctly?
YES
Is any of the consumables ( ) dirty?
*1
NO
Is any of the consumables ( ) worn out?
*1
NO
*1 : Pick Rollers and Brake Rollers
Use documents that satisfy the requirements.
42)? For information about the document requirements, refer to
NO
Documents" (on page
Fan the document before loading, or reduce the number of sheets of the document
to load.
NO
Correctly install the consumables.
For how to install the consumables (*1), refer to
NO
page
Clean the dirty consumables.
For how to clean the consumables (*1), refer to
YES
117).
Check the consumables counters. Replace the consumables, if needed.
For how to replace the consumables, refer to
YES
123).
If you cannot solve the problem after taking the measures above, check the items
shown in
page
authorized FUJITSU scanner service provider.
42).
123).
"8.4 Before Contacting Your Dealer or Scanner Service Provider" (on
152), and then contact the dealer where you purchased the scanner or an
"2.2 ADF-Loaded
"Chapter 7 Consumables" (on
"6.2 Cleaning the ADF" (on page
"Chapter 7 Consumables" (on page
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
147