Fujitsu FI-6750S Operator's Manual page 166

Chapter 9 Operational Settings
■Resetting the counters
Reset the consumables counter(s) every time you replace the
consumable(s). Follow the procedure below.
1
Click the [Clear] button beside the replaced consumable.
2
Click the [OK] button on the confirmation message
displayed.
⇒
The counter is reset to 0.
The remaining ink indication (percentage) is reset to 100.
3
In the Software Operation Panel, click the [OK] button.
■Replacing and Cleaning Instructions
The following may sometimes appear while using the scanner:
Replacing instruction:
Cleaning instruction:
According to the instruction displayed, clean the scanner or
replace the consumables.
When you click the [Ignore] button, the cleaning instruction
disappears and the scanning continues. You may be able to
continue the scanning for a while, however, it is recommended
that you replace the consumable(s) as soon as possible.
To stop the scanning and replace the consumable(s) right
away, click the [Cancel] button.
For how to replace the consumables, refer to the following
sections:
Pick Roller; see "7.2 Replacing the Pick Rollers" (on page 125).
Brake Roller; see "7.3 Replacing the Brake Roller" (on page 127).
For how to clean the scanner, refer to
(on page 114).
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
"Chapter 6 Daily Care"
Glossary
TOP
Contents
Index
166