Fujitsu FI-6750S Operator's Manual page 158

Chapter 9 Operational Settings
Item
Page Counter For evaluating the consumable
(Consumables replacement cycle.
counters) Use this function to reset the
counters after replacing the consum-
ables.
Power saving Specify the waiting time before
entering the Power saving mode.
Offset Adjust the starting position for the
document scanning.
Vertical magnification Adjust the magnification in the
Adjustment feeding direction on the scanning
side specified for [Unit].
Yes: Configurable
Explanation Selectable Parameters
After cleaning/Brake Roller/Pick Roller
Remaining Ink (only when the imprinter
option for fi-6670/fi-6670A is installed)
Setting range: 15 to 55 min. (in steps of
5 min.)
Unit:
For connection via SCSI/USB Connec-
tor 1:
ADF (Front), ADF (Back) (fi-6670/fi-
6670A/fi-6770/fi-6770A only)
Flat Bed (Flatbed type only)
For connection via SCSI/USB Connec-
tor 2:
ADF (Back), Flat Bed (fi-6770/fi-6770A
only)
Main/Sub: -2 mm to 3 mm (in steps of
0.5 mm)
Unit: ADF, Flat Bed (Flatbed type only)
Setting range: -3.1 to 3.1% (in steps of
0.1%)
Default Connection via Connection via
SCSI/USB
Connector 1 Connector 2
0 pages Yes Yes
Shown only
when the
imprinter
option for fi-
6670/fi-
6670A is
installed.
15 min. Yes Yes
Main/Sub: Yes Yes
0 mm
0% Yes Yes
TOP
Contents
Index
SCSI/USB
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
158