NSD ABSOCODER NCW-3DHIPM2R Specifications & Instruction Manual page 97

General Status
Code (in hex)
2A Group 2 only server general failure
2B Unknown Modbus Error
2C Attribute not gettable
2D Instance Not Deletable
Service Not Supported for
2E
Specified Path
2F ～ CF Reserved
Reserved for Object Class specific
D0 ～ F9
errors
FA Error in Function Call
FB Error from Lower Level(CIP)
FC Error from Lower Level(NET)
FD Error from Lower Level(EPIC)
FE Error from Lower Level(TCP)
Reserved for Object Class specific
FF
error
Status Name
This error code may only be reported by DeviceNet Group 2 Only
servers with 4K or less code space and only in place of Service not
supported, Attribute not supported and Attribute not settable.
A CIP to Modbus translator received an unknown Modbus Exception
Code.
A request to read a non-readable attribute was received.
The requested object instance cannot be deleted.
The object supports the service, but not for the designated application
path (e.g. attribute).
NOTE: Not to be used for any set service (use General Status Code
0x0E or 0x29 instead)
Reserved by CIP for future extensions.
This range of error codes is to be used to indicate Object Class specific
errors.
Detected a CIP e
Detected an error from lower level (
Detected an error from lower level (
Detected an error from lower level (EPIC).
Detected an error from lower level (TCP).
This error code is to be used to indicate Object Class specific errors.
Description of Status
rror in Function.
88
).
CIP
).
NET
(3/3)