Anonymous Call Blocking; Distinctive / Priority Ringing And Call Waiting Tone - Cisco Linksys RT31P2 Administration Manual

Expected Call and Network Behavior
User Action Required to Deactivate or End

5.20. Anonymous Call Blocking

Service Description
User Action Required to Activate or Use
Expected Call and Network Behavior
User Action Required to Deactivate or End

5.21. Distinctive / Priority Ringing and Call Waiting Tone

Service Description
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
Listen for dial tone and enter the telephone
number you are forwarding your call to.
Activation will be confirmed with three short
bursts of tone and your forwarding will be
activated.
Alternatively, the user can activate this feature
from a web browser interface.
Note: The forward delay is entered from the
web interface. Default is 20s
This feature allows a user the option to divert
(forward) calls to their telephone number to any
other dialable number when their phone is not
answered by using the touchtone keypad of
their telephone or web browser interface. This
service is activated or deactivated from the
phone being forwarded or the web browser
interface.
Lift the receiver
Listen for dial tone
Press *__
You will hear a confirmation tone signaling your
change has been accepted.
Alternatively, the user can deactivate this
feature from a web browser interface.
By setting the corresponding configuration
parameter on the PHONE ADAPTER, the
subscriber has the option to block incoming
calls that do not reveal the caller's Caller ID.
Pick up the receiver
Listen for dial tone
To Activate Press *__
When activated by the user, callers will hear
(busy) tone.
To De-activate Press *__
The PHONE ADAPTER supports a number of
90