Cisco Linksys RT31P2 Administration Manual page 105

Administration guide
Hide thumbs Also See for Linksys RT31P2:
Table of Contents

Advertisement

G729b_Dynamic_Payload
NSE_Codec_Name
AVT_Codec_Name
G711u_Codec_Name
G711a_Codec_Name
G726r16_Codec_Name
G726r24_Codec_Name
G726r32_Codec_Name
G726r40_Codec_Name
G729a_Codec_Name
G729b_Codec_Name
G723_Codec_Name
# *** NAT Support Parameters
Handle_VIA_received
Handle_VIA_rport
Insert_VIA_received
Insert_VIA_rport
Substitute_VIA_Addr
Send_Resp_To_Src_Port
STUN_Enable
STUN_Test_Enable
STUN_Server
EXT_IP
EXT_RTP_Port_Min
NAT_Keep_Alive_Intvl
# ***
Line_Enable[1]
# *** Streaming Audio Server (SAS)
SAS_Enable[1]
SAS_DLG_Refresh_Intvl[1]
SAS_Inbound_RTP_Sink[1]
# *** NAT Settings
NAT_Mapping_Enable[1]
NAT_Keep_Alive_Enable[1]
NAT_Keep_Alive_Msg[1]
NAT_Keep_Alive_Dest[1]
# *** Network Settings
SIP_TOS/DiffServ_Value[1]
Network_Jitter_Level[1]
RTP_TOS/DiffServ_Value[1]
# *** SIP Settings
SIP_Port[1]
SIP_100REL_Enable[1]
EXT_SIP_Port[1]
Auth_Resync-Reboot[1]
SIP_Debug_Option[1]
OPT/1-line excl. NTFY/1-line excl. REG/1-line excl. OPT|NTFY|REG/full/full excl.
OPT/full excl. NTFY/full excl. REG/full excl. OPT|NTFY|REG
# *** Call Feature Settings
Blind_Attn-Xfer_Enable[1]
MOH_Server[1]
Xfer_When_Hangup_Conf[1]
# *** Proxy and Registration
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
"99" ;
"NSE" ;
"telephone-event" ;
"PCMU" ;
"PCMA" ;
"G726-16" ;
"G726-24" ;
"G726-32" ;
"G726-40" ;
"G729a" ;
"G729ab" ;
"G723" ;
"No" ;
"No" ;
"No" ;
"No" ;
"No" ;
"No" ;
"No" ;
"No" ;
"" ;
"" ;
"" ;
"15" ;
"Yes" ;
"No" ;
"30" ;
"" ;
"No" ;
"No" ;
"$NOTIFY" ;
"$PROXY" ;
"0x68" ;
"high" ;
# options: low/medium/high/very high
"0xb8" ;
"5060" ;
"No" ;
"" ;
"Yes" ;
"none" ;
# options: none/1-line/1-line excl.
"No" ;
"" ;
"Yes" ;
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt31p2-naPt31p2Linksys pap2

Table of Contents