Provisioning Server Redundancy; Configuring The Web Server And Ivr; System Configuration - Cisco Linksys RT31P2 Administration Manual

Administration guide
Hide thumbs Also See for Linksys RT31P2:
Table of Contents

Advertisement

string supports one level of macro substitution, with the same variables as for the Upgrade_Rule
above. An empty string does not generate a syslog message.
Parameter Name
Upgrade Enable
Upgrade Error
Retry Delay
Upgrade Rule
Log Upgrade
Request Msg
Log Upgrade
Success Msg
Log Upgrade
Failure Msg
Note: In a customized PHONE ADAPTER, the upgrade rule would point to a service provider's
server.
4.2.2.

Provisioning Server Redundancy

The Provisioning Server (PS) may be specified as an IP address or a FQDN. PS redundancy is not
available in the former case. For the latter, PHONE ADAPTER shall attempt to resolve the IP address
of the PS via DNS SRV, then DNS A Record. In either case, the DNS server may return a number of
IP addresses with priority (priority can be indicated in the case of SRV record; for A records, all IP
addresses have the same priority). The PHONE ADAPTER then contacts the IP address with the
highest priority. If that fails, the PHONE ADAPTER shall contact the next available IP address. The
PHONE ADAPTER shall continue the process until one of the PS responds. If all PS fail to respond,
the PHONE ADAPTER shall log an error to the Syslog server.
4.2.3.

Configuring the Web Server and IVR

Parameter Name
Restricted Access
Domains
Enable Web Server
Web Server Port
Enable Web Admin
Access
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
Description
Master enable for firmware upgrade
operations
Retry interval following upgrade failure
Upgrade script.
Syslog message generated when
attempting an upgrade
Syslog message generated after a
successful upgrade
Syslog message generated after a failed
upgrade

System Configuration

Description
This feature is used when implementing software
customization.
Enable/disable web server of PHONE ADAPTER
This feature should only be used on firmware version 1.0.9 or later.
TCP port through which the PHONE ADAPTER web
server will communicate
Enable/disable Admin pages of web server of PHONE
ADAPTER
Type
Default
Bool
Yes
Time0
3600
UpgradeScript
empty
UpgradeMsg
See
provisioning
discussion
section
UpgradeMsg
See
provisioning
discussion
section
UpgradeMsg
See
provisioning
discussion
section
Type
Str127
Bool
Uns8
Bool
Default
Yes
80
Yes
46

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt31p2-naPt31p2Linksys pap2

Table of Contents