Table of Contents
Advertisement
User Action Required to Deactivate or End
5.7.
Disable or Cancel Call Waiting
Service Description
User Action Required to Activate or Use
Expected Call and Network Behavior
User Action Required to Deactivate or End
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
alerting them to the second call. The person
calling will hear normal ringing.
See Cancel Call Waiting.
The PHONE ADAPTER supports disabling of
call waiting permanently or on a per call basis.
To temporarily disable Call Waiting (for the
length of one call):
Before placing a call:
Lift Receiver
Press *__
Listen for dial tone then dial the number you
want to call.
Call Waiting is now disabled for the duration of
this call only.
To deactivate Call Waiting while on a call:
Press the switch hook or flash button briefly.
This puts the first call on hold.
Listen for three short tones and then a dial
tone.
Press *__
Listen for dial tone then return to your call by
pressing the switch hook or flash button. Call
Waiting is now disabled for the duration of this
call.
To
deactivate
Call Waiting
permanent basis (until cancelled):
Lift the receiver
Listen for dial tone
Press *__
You will hear a confirmation tone signaling your
request to cancel Call Waiting has been
accepted.
Callers who dial your number will receive a
busy signal or, if available, the caller will be
forwarded
to
voice
predetermined forwarding number.
If you have cancelled Call Waiting temporarily,
while
on
a
mail
or
another
82
Advertisement
Table of Contents
