Three-Way Calling; Three-Way Ad-Hoc Conference Calling - Cisco Linksys RT31P2 Administration Manual

Expected Call and Network Behavior
User Action Required to Deactivate or End

5.13. Three-Way Calling

Service Description
User Action Required to Activate or Use
Expected Call and Network Behavior
User Action Required to Deactivate or End

5.14. Three-Way Ad-Hoc Conference Calling

Service Description
User Action Required to Activate or Use
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
Hang-up the telephone.
The user can originate a call to a 3rd party
while engaging in an active call.
Press the switch hook or flash button on the
phone to place the first party on hold
Listen for three short tones followed by dial
tone
Dial the number of the 3
rd
When the 3 party answers you may have a
conversation with them while the other party is
on hold.
To hold a conference with the party on hold
rd
and the 3 party, simply press the switch hook
or flash button
The PHONE ADAPTER supports up to two
calls per line. The PHONE ADAPTER can
conference two calls by bridging the 2
parties.
Hang-up the telephone.
This feature allows the user to conference up
to two other numbers on the same line to
create a three-way call.
If you are already on a call and wish to add a
third party:
Press the switch hook or flash button
Listen for dial tone
Dial the third party normally
When the third party number starts to ring
press the switch hook or flash button again
You now have the original caller and the third
party together with you on the same call.
If you want to initiate a new Three Way Call:
rd
party.
nd
and 3
rd
86