Phone Adapter Led Status; Broadband Router (Rt31P2) Led Status - Cisco Linksys RT31P2 Administration Manual

2.1.

Phone Adapter LED Status

LED Color(s)
Power Blue
Ethernet Blue
Phone 1 /
Blue
Phone 2
2.2.

Broadband Router (RT31P2) LED Status

LED Color(s)
Power Green
Ethernet Blue
Phone 1 /
Blue
Phone 2
4. One 5 Volt Power Adapter Interface (Figure 3, above) for PAP2 Phone Adapter and 12 Volt Power
Adapter for the Broadband Router (RT31P2)
This interface accepts the PHONE ADAPTER power adapter that came with the unit. Linksys does
not support the use of any other power adapters other then the power adapter that was shipped with
the PHONE ADAPTER unit or the Broadband Router (RT31P2)
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
Activity Description
Off Power OFF
Blue On Power On / Device Ready
Blue Blinking Booting / System Self-Test / Firmware upgrade
POST (Power On Self Test) failure (not bootable)
Red On
or Device malfunction
Off No Connection on Ethernet
Blue On Ethernet Connection established
Blue Blinking Data Sending / Receiving
Off Phone is not in use/not provisioned or registered
Blue On Registered/provisioned
Blue Blinking Phone is in use/Incoming Call detected
Activity Description
Off Power OFF
Solid Green Power On
Green
Booting / System Self-Test / Firmware upgrade
Blinking
POST (Power On Self Test) failure (not bootable)
Red On
or Device malfunction
Off No Connection on Ethernet
Solid Green Ethernet Connection established
Green
Data Sending / Receiving
Blinking
Off Phone is not in use/not provisioned or registered
Green On Registered/provisioned
Green
Phone is in use/Incoming Call detected
Blinking
19