Speed Calling - Up To Eight (8) Numbers Or Ip Addresses - Cisco Linksys RT31P2 Administration Manual

User Action Required to Activate or Use
Expected Call and Network Behavior
User Action Required to Deactivate or End
5.22. Speed Calling – Up to Eight (8) Numbers or IP Addresses
Service Description
User Action Required to Activate or Use
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
ringing and call waiting tone patterns to be
played when incoming calls arrive. The choice
of alerting pattern to use is carried in the
incoming SIP INVITE message inserted by the
SIP Proxy Server (or other intermediate
application server in the Service Provider's
domain).
Pick up the receiver
Listen for dial tone
Press *__
With this service, incoming calls from up to __
telephone numbers
identified by distinctive ringing. A distinctive
ringing pattern
accompanies incoming
designated telephone numbers.
If the user is engaged in conversation and a
call from one of the designated numbers
arrives, a distinctive call waiting tone (i.e. short-
long-short) accompanies the incoming call.
Calls from other telephone numbers ring
normally.
The PHONE ADAPTER
programming of up to 8 long distance, local,
international or emergency numbers and/or IP
addresses for fast and easy access.
Pick up the receiver
Listen for dial tone
Press *__
Dial the single digit code under which the
number is to be stored (2-9)
Dial the complete number to be stored just as if
you were going to dial it yourself
Listen for Confirmation tone (two short beeps)
Hang up or repeat the sequence
Note: To enter IP addresses, a graphical user
interface like a web browser must be used.
can be automatically
(i.e. short-long-short)
calls from the
supports user
91