Cisco Linksys RT31P2 Administration Manual page 42

string supports one level of macro substitution, with the same variables as for the Profile_Rule above.
An empty string does not generate a syslog message.
General Purpose Parameters:
ParName: GPP_A
Default: empty
GPP_A through GPP_P are the 16 General Purpose Parameters, usable by both the provisioning and
the upgrade logic. Each general purpose parameter can be configured to hold any string value.
Such a value can then be incorporated in other scripted parameters.
General Purpose Secure Parameters:
ParName: GPP_SA
Default: empty
GPP_SA through GPP_SD are the 4 Secure General Purpose Parameters, usable by both the
provisioning and the upgrade logic. Each secure parameter can be configured to hold any string
value. Such a value can then be incorporated in other scripted parameters. The secure parameters
are not accessible through the PHONE ADAPTER web interface, and can only be set via a
configuration profile. Also, the parameters cannot be incorporated as part of a syslog message.
Parameter Name
Provision Enable
Resync On Reset
Resync Random
Delay
Resync Periodic
Resync Error Retry
Delay
Resync From SIP
Resync After Upgrade
Attempt
Resync Trigger 1
Resync Trigger 2
Profile Rule
Profile Rule B
Profile Rule C
Profile Rule D
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
through GPP_P
through GPP_SD
Description
Master enable for configuration profile
resync operations
Resyncs configuration profile from
configuration server whenever the PHONE
ADAPTER resets.
Spread interval for resync requests
Resyncs configuration profile periodically
after reset.
Retry interval following resync failure
Enables resync of configuration profile from
a SIP command.
Configuration profile URL script.
Type Default
Bool yes
Bool yes
Time0 2
Time0 3600
Time0 3600
Bool Yes
Bool Yes
ProfileScript /Phone
Adapter.cfg
ProfileScript
ProfileScript
ProfileScript
42