Advertisement
www.ti.com
4.1.2 EVM Register Settings
Figure 4-3
shows the ADC register settings. Modify the registers to enable different device modes (such as filter
settings and power settings). Access this page by selecting the Register Configurations under Pages on the left
side of the GUI.
SBAU431 – JULY 2024
Submit Document Feedback
Figure 4-3. EVM Register Configuration
Copyright © 2024 Texas Instruments Incorporated
Implementation Results
ADS1282EVM-PDK Evaluation Module
15
Advertisement
Need help?
Do you have a question about the ADS1282V2EVM-PDK and is the answer not in the manual?
Questions and answers